The major event this month has been the launch of my school with a five day workshop. Students came from far afield: Bowral, Wollongong, Northern NSW, Mt Tamborine. They were a very diverse group with a range of experience, all coming together for a great week of weaving fellowship and fun.
Note! I have updated the list of classes available till the end of January. Please check out the page at the top under “Kay’s Weaving School”.
Day 1 saw us gathering, discussing projects and preparing warps. Some used warping boards, others mills. Some prepared inside, others outside. It was suddenly a hive of activity that never let up till the very last moment of the very last day.
Day 2: They threaded the looms.
And by the end of day 3 they were weaving.
Day 4: By late afternoon both Bronwyn and Joan had finished their projects. It was pretty much a dead heat in who finished first.
Joan cuts off her fabric for a vest.
Joan’s fabric has a mixed coloured warp woven in an 8 shaft twill. This photo is of it after it was laundered the following day. There was much discussion which was to be the “right” side.
So what were they going to do the next day? That night I set both of them a challenge by rethreading their looms with warps similar in threading to what they had been working on. The challenge would be for them the next day to experiment with pattern diversity using the same treadle tie up as they used for their project.
Day 5: Bronwyn dyed her silk scarf using a clamped shibori technique.
And wove with the same twill threading, this time experimenting with woven shibori. She gets to take home the piece to pull up and dye. She used fishing line as the supplementary thread which is why it is difficult to see.
Joan wove on another mixed coloured warp this time in shades of pink cotton, experimenting with variations of the same treadle tie up.
Sharon finished her knee rugs by mid day and spent the rest of the time plying fringes. She has two beautiful and very different knee rugs from the same warp, one in plain weave, the other in twill.
Vilasa’s goal was to learn about countermarche looms as she had one at home that hadn’t been used. As well as going home with a greater understanding of the loom she has a very nice collection of 4 tea towels in different effects.
Belinda completes a long series of ten linen napkins. They will be beautiful when they are washed and the lace weave opens up.
It was an amazing 5 days. I am so very pleased with how much each of them achieved. It really was a lot of fun! The diversity of projects allowed for learning covering a wide range of techniques and design considerations. I thought I’d share some comments. They perhaps explain what made the week so “Special” and for me lived up to the title I’d given it.
So Kay Faulkner is not only a master weaver but also a superb teacher who can keep 5 different students on 5 different looms energised and learning over a week long class. Each of us crossed our own personal hurdles: weaving yardage for fabric, learning how to set up a loom, how to blend yarns in the warp and or weft, how to change the patterns woven part way through a length, how to do clamped resist shibori. I wove 10 table napkins in linen, in two different huck-lace patterns, finishing on time on Friday afternoon, despite a stressful moment on Wednesday when I discovered many flaws in my threading through the heddles and reed. Kay showed me how to fix them, and set me the target of 5 napkins a day. So I completed a major project ( for me) in a week! We were a great group, funny and lighthearted in the breaks and in earnest at the looms. Kay is a generous and organised teacher, with the resources to take each of us up a step in skill levels despite not all starting at the same level.
It was a great week, one I highly recommend to any weaver wanting to improve existing skills or acquire new ones.
Thankyou Kay for your patience in passing on your knowledge and for making weaving so”understandable” and enjoyable and not being afraid of.
Many thanks for accepting me in your inaugural ‘Special School’ week of weaving. From the moment you opened the front door of your studio with such a welcoming hello! and a large smile I knew I was going to have a wonderful experience. Your range of floor looms is nothing short of amazing and the studio space airy, large and very pleasant to work in. This was my first experience using a floor loom. The self-contained kitchen facilities for preparing lunch and dinner were much appreciated as this enabled me to have meals without leaving the studio thus enabling extra time for weaving. Your experience running weaving workshops certainly shone through with all 5 participants finishing their projects in ample time to sit back and discuss the finished project in depth with you. For me personally I cannot believe I actually wove 3.5 m of a beautiful twill fabric for a vest. Not only was my finished fabric beautiful on and off the loom it blossomed once it was washed and steam ironed at the studio. I cannot thank you enough for your guidance in selection of yarn and structure for my chosen project. Your teaching skills, knowledge and patience were exactly what I required to advance my weaving skills. I am now confident for the first time to wind a warp, dress a loom, select structures and yarns suitable for an end use and weave a finished project on a floor loom. Your home cooked treats for morning and afternoon tea just topped the whole experience off for me. Last but not least many thanks for adjusting my vest pattern for me.
I have spent the day since my return home searching the internet for the best floor loom for me and I will run my findings past you when we next meet at your weaving studio in the near future. Once again so many thanks. PS I have just completed putting a warp on my table loom and just now sampling structures in twill.
What can I say! A fabulous week weaving with Kay at her inaugural weaving school! Kay is a fantastic teacher of weaving. Nothing is too much trouble for her. She is methodical, diligent, hard working and certainly a master weaver. Met some great ladies from the Gold Coast Spinners & Weavers group. Also renewed acquaintance with Belinda from Bowral, New South Wales.
Bronwyn Hutchins, Wollongong, Australia
And then I had to come down from the high of that week. Right in the middle of that week, the local paper came and photographed what was happening. The article appeared in the paper.
I would like to express my thanks to all who were involved in hosting this exhibition at the Emerald Regional Art Gallery. This is a beautiful space.
I have had some opportunity to continue exploring weaving on the Laos loom project. There is great enjoyment and in some ways it is a liberating experience to weave in the great outdoors. BUT it is winter and there were some days when it was just way too cold to play. And then it blew and no way was I going out in that. And then it rained. I did go and have a look but everything was damp. So I have also been discovering the down side of weaving on the patio. However, there were a couple of glorious days. So the story for this month….
Yes I have woven! The tension knot (from last month’s blog) works fine. The improvised light treadles of a couple of lengths of pine function quite well though I discovered that they needed to be attached so that one was slightly off centre to the left and the other to the right so that they stayed separated. I was relieved to see that the shafts still stayed level and the swinging free beater works just fine. I can even weave parallel to the front beam!
I was intrigued by the swinging beater and so had a go at setting one up on the countermarche loom. That’s easy as it has an overhead beater and I just removed the reed and strung it up with a couple of cords. Here it is just after I’d taken the reed out of the beater and before I removed the frame. I’m considering applications. It is remarkably light to weave with. There’s no way you could beat heavily with just this. It moves. I’ve found the one from the traditional Laos loom with it’s frame to be much heavier and easier to control.
On a jack loom, I had to construct some sort of side support for an overhead rod. A trapeze that I use for warping, a couple of stockings to hold it tightly in position and a rod to suspend the reed from work just fine. Yes I’m playing , proving that it can be done and one never knows what comes out of a bit of play. A wider reed makes for easier parallel weaving.
Back to the Laos loom and real weaving. I have discovered some facts. I have discovered that there is a lot of loom waste. The tension knot takes well over 50 cm of warp just to do the knot. Unless there is some means of spreading a warp, there needs to be quite a length from the front of the loom to the back to enable this to occur. In Laos I only saw 2 instances of a weaver employing a ‘spacer’ at the top of the loom to do this. This explains why the looms are so long. I have inserted two sticks behind the vertical storage to help spread the warp. Because the loom is so long it has little effect on the height of the shed when weaving. I’m calculating that the amount of loom waste as it is now is probably at least 2 meters.
So after weaving 5 cm or so, I considered my options. I would soon run out of warp if I continued. I do want to maximize the experience of using that vertical storage system. I had proved that I could weave on it as is. This amount of loom waste and the time it takes to set up the loom even without setting up any vertical storage, sure makes sense to wind very long warps. How to minimize loom waste? I got out the trusty drill and moved a few bars at the back and converted to using long ties and the warp beam that I’d left on the loom. Now I have a more conventional loom waste and can weave right up to behind the vertical storage.
The loom now looks more like something Western weavers are used to seeing. At the same time I thought I’d reconstruct the beater and put the reed into it. Note the stockings securing it in place. I had to move the vertical storage forward to be able to use the warp beam where it was. The loom is now a mix of East and West. Of course in all the process of winding the warp onto the back beam without cutting off the original weaving, there was some difference in tension, though much less than one might expect. So after retying the knots the loom is again ready to weave. The original weaving is still there but of course now distorted. The second pink line will be the beginning of the next adventure. Next step will be leaning about vertical storage systems.
Lastly: Joan’s pink warp needed to be woven off. I wanted to be able to show students (and I will be seeing Joan in a couple of weeks) that there is a wide range of diversity achievable from using a given set of parameters. I have used the same treadle tie up (8 shaft twill sequence) as Joan had with the addition of plain weave to weave this collection of towels, placemats and serviettes. Apart from a huge diversity of twills achieved simply by using the treadles in different sequences, the twill sequence can be combined with plain weave as a supplementary weft in various styles. All have elements of Joan’s original treadle tie up.
One day a week classes have started on Tuesdays. There are 3 students with one totally new weaver and two “beginners”. After 2 weeks the looms are threaded and in one case weaving is well underway. It is always exciting seeing weaving happening.