February 2019: Parallel, more adventures with vertical storage and woven shibori in Tasmania

February 28, 2019

All is organised for the exhibition next month. Here’s the invitation. Next month of course there’ll be more on the exhibition. It will be well under way by then.

RAG Invites March 2019 Parallel HR

Now to continue on from last month’s blog.  I had started to explore the possibility of weaving with a vertical storage positioned between the beater and the shafts. Previously I had worked with it behind the heddles at the back of the loom. Having it positioned at the rear of the loom allows for free movement of the shafts. Having the storage in front of the loom means that if anything is selected on the pattern shafts, it has to either work with the heddles or it has to be disengaged every time the basic fabric structure is woven.

In the previous month, I explored the use of the stored pattern being used in addition to plain weave to create vertical floats for Bronson Lace. This is an ideal application. What else could I do? As an extra challenge, all the patterns to be woven had to have elements of the same pattern developed for the Bronson Lace.

I have already shown this image of 3 approaches last month. The previous month recorded the process of weaving Bronson Lace. As you’ll see there was more woven on this warp.

DSC06391

It is extremely logical to achieve weft floats for woven shibori. It was also timely weaving some woven shibori as it has been the focus over my studio work leading up to next month’s exhibition. The resist floats can easily be stored in the vertical storage. It is common and especially so in this pattern, that every resist row is different. This suits storing it and allows for a progression of sequences with plain weave being woven on the shafts between.

This undyed woven shibori design shows direct correlation to the Bronson Lace table mat.

DSC06398

I decided to explore other possibilities.

The next challenge was to weave the design as a supplementary weft motif. This is a typical style of weaving for this type of loom in S E Asia. I have modified and extended the original pattern. There are 37 pattern rows. As this is an image with a mirror repeat, I needed to store the design to achieve this. I have discovered that the number of bamboo sticks that can be efficiently used to store a design is limited. This was my opportunity to investigate using loops of thread to store the design. I was very familiar with this from Se Asia but had never had the occasion to apply it.

Loops of thread are passed between the long heddles instead of bamboo or dowel. These loops are suspended on hooks attached to a length of wood. For multiple repeats, there need to be a series of hooks at the top and bottom of the storage unit.

DSC06369

See blog October 2015 (second half of the blog) for a full explanation on how to pick up the motif and store a design.

DSC06372

Here’s a close up of the storage loops. Move each one down (or up) to select the next pattern row.

DSC06377

Looking from the top down, the stored pattern can be easily seen.

DSC06389

Two rows of pattern are woven, separated by a row of plain weave. As I suspected, I needed to deselect the pattern lift between plain weave rows. The lift otherwise would be included in the plain weave. Having the storage unit behind the shafts means that the selection does not alter plain weave. The same pattern row can be left selected for however long you wished to weave the same row. In this case however no selection could be maintained. Rather I left the thread loop in position and reloaded the pattern lift for the repeated row. It was a little inconvenient however the ease of storing the pattern made up for this inconvenience. In spite of the double handling of the pattern loop, weaving the reverse of the pattern happened surprisingly quickly. I took nearly 2 days to pick up the pattern and wove it backwards in less than 3 hours with a cuppa included.

DSC06388

Rather than weaving a long runner with several reversals of the stored pattern, I wondered what else was possible.

I decided to revisit Becker’s Pattern and Loom and repeat the technique I had already explored. (Blog: September 2017 ) I decided to start with a simplified smaller version of the same motif that I’d been using. Rather than paired threads there were 4 or 6 threads lifted together. The design is interpreted so that each square equals 2 threads, necessary for this technique of changing twill direction to work, so 3 squares in this case equals 6 ends. The front and back of this series are labelled below.

I soon decided that I didn’t like the effect. (A)

Next I reworked the design so that there were only single squares to be lifted. This was then woven in the style outlined in Becker. There is that interesting effect of the sides of the diamond being different. (B)

It was in my mind that the weavers of Cambodia  ( Blog:  May 2017) wove diagonal lines using this loom set up and basic principle. I have this lovely ikat cushion with the diamond ground structure. It is woven in plain weave with pattern shafts.

DSC06437 (600 x 400)

I decided that structurally this would be achieved by including either an extra thread being picked up at the reversal points in the stored design or an extra row being woven in the weaving sequence. This would achieve the outside threads in a series of 3 working in the same manner. I now have a clean diagonal line. (C) The same motif is used for B and C.

The final motif in this series works with a stored lift of 2 or 3 pairs lifted together in combination with a single pair. In essence it is an extension of A and C. One extra thread or row is included at the reversal points. Again the lines are clean. (D)

It is important to note that the reversal points in C and D must be on the same line of the treadling sequence.

Here is the record of that series. A is on the right.

combined2

And then I ran out of warp! This is an overview of all the work from that warp.

DSC06426

The really great news is that all that effort I took in preparing the warp so that individual warp threads pass through single long heddles is done, ready for the next experiment.

DSC06433 (600 x 400)

The Handweavers Guild of Tasmania had invited me to run two, two day woven shibori workshops. One was in Launceston. The other was in Hobart.

Both groups produced an exciting array of work. It is quite amazing what was achieved in two days. Weavers wove on rigid heddle looms as well as those with 4 or 8 shafts.

Here are some images.

The Northern Group.

IMG_4496

IMG_4497

IMG_4505

The Southern Group.

IMG_4539

IMG_4540

IMG_4543

Thanks go to the organisers of both workshops and to the weavers who participated so enthusiastically and with such a willingness to learn.

Coming up next month:

The report on the exhibition.

The studio class on Woven Shibori will be from 18-22 March. There are still places available. Right now I’m working at setting up warps for this class. If you would like to attend and work on a specific project, this is also an available option. There are a number of design approaches being set up but as usual there is often something out of left field.

This loom has been set up to weave an 8 shaft fabric on an 8 shaft loom with a 5 shaft warp shibori pattern using a horizontal storage system. This system is typical of SE Asia. It is a very useful technique for any situation where you need just one or more shafts extra to what you’ve got available.

DSC06421

For full details of this class: woven shibori

The featured image at the top of this blog is an image of the hard copy invitation.


January 2019: Studio class, vertical storage and getting ready for the exhibition.

February 3, 2019

parallel title

A reminder: This exhibition celebrates 20 years of woven shibori. I have invited Catharine Ellis to celebrate with me. All weaving is completed for the exhibition. The exhibition lists, artist statements and didactic panels submitted by both Catharine and myself. It’s rather a relief to be at this stage.

Redland Art Gallery has the exhibition listed in its exhibition guide.

RAG Exhibitions Booklet 2019_Kay Faulkner and Catharine Ellis (3)

The studio class as usual for this time of year was Linen and Lace. This time of year is usually perfect for linen. It was, though I suspect, hotter than usual. Unlike other years this group of four weavers all decided that they wanted to work on their own projects. Three had completed the course in previous years and wanted to revisit a structure, the other wanted to pursue a personal challenge. This meant that I did not need to set up a multitude of looms in different structures.

Maggie has the perfect solution for jet lag or so she says. She arrived in Australia from the UK on the day before the class. She treats attending a class in the studio as a gentle way to recover. Her project was to weave a series of napkins in linen and 3 end Huck. Her design was a modification of a studio hand towel. Her ongoing challenge was to weave every one differently. On the last day she wound an extra warp for 4 more napkins to take with her to be threaded with the same draft so that she could continue her challenge. It was well tied up as it will travel with her for her stay here and then get put on her loom when she goes back to the UK.

DSC06334

Kerry is a new student to the studio. She had asked whether she could use her single 16’s linen and weave in Huck. She had woven with this yarn at home and had some difficulty with it. We started by designing her project. The warp went on and we soon saw that there was potential for warp fraying. The solution was to weave with a temple. This posed no problems as she was used to doing this. The other part of the solution was the use of sizing. Kati Meek has a recipe in her book, Warp with a trapeze and dance with your loom. It is amazing. It’s very gluggy.

DSC06363

The sizing was put on with a sponge working in only one direction. The warp was also woven as soon as it was put on with no need to wait till it dried.

DSC06322

Weaving with a temple and the sizing meant that this warp could be woven with no fear. Various treading drafts were developed. This is an image of her project being woven. Unfortunately my image of the full piece isn’t wonderful so I will not be sharing what she achieved. However it is a beautiful fine piece of linen weaving.

DSC06324

Vilasa wanted to explore design, Huck lace and if time permitted Bronson lace. As she spins her own cotton, she put on a cotton warp as she wanted to weave with something that was relevant to her weaving at home. Vilasa spent time on drafting every day. She became expert at designing with only horizontal or vertical floats or both together. She accepted various design challenges. In the five days she wove 6 of her own Bronson Lace designs. This length of weaving is destined to be a panel of a shirt. Here are 3 of her designs.

DSC06336

DSC06341.jpg

DSC06342

Jan had intended weaving a fabric length in turquoise linen. The yarn didn’t get organised so she wove another project that she had planned for later in the year. She had some hand spun wool that she wanted to use for a vest. The vest pattern is based on an existing garment. She had decided that the fabric should not just use hand spun as otherwise it would be too bulky and too heavy for her use. Rather, the hand spun act as an accent yarn as it had wonderful lumps and bumps. To achieve its potential she was going to combine it with silk and a commercial wool.

Jan had acquired some 20/2 silk, natural in colour to be dyed for the warp. Anyone who knows Jan, realises that she loves turquoise, greens and blues. In fact here is her rag rug that she had brought back finished from the woven shibori class in November.

DSC06316

But I digressed. The silk had to be dyed. So that she didn’t end up with dyed silk left over from the warp, she wound the warp, secured it well and then dyed it. She also chose to paint a skein in various colours that would work in with this green and her weft colours. The warp went on smoothly. Jan’s challenge has been to weave the 3 yarns and to work out the best way to maximise the characteristics of the hand spun wool and very pretty multi-coloured silk. The yarns are to be used randomly so that there is no definite stripe repeat. She is still working on this. She probably needs an extra half a day to finish and I will certainly look forward to seeing this off the loom and made into that vest.

DSC06403

I had put on an extra linen warp on a loom to accommodate two requirements of this class, just in case there was an opportunity for it to be woven on. Vilasa had expressed a desire to also explore Bronson Lace and Kerry was wanting to work in singles 16 linen. Kerry enjoyed time weaving on “good” linen. Maggie wove a strip to be used as a book mark while Vilasa of course developed her own design to be woven. Now that she understands the principles of horizontal and vertical floats, this was an easy transfer to another lace structure.

There was left over warp so I got to finish it off. Yes, more hand towels for the studio. Both employ the same block design within a lace weave frame. One has the blocks in lace, the other as a supplementary weft pattern.

DSC06382

During the week, I also took the opportunity to get a loom dressed and ready for some play with a loom and vertical storage. The students were interested to see a frame become a loom. I was asked: Where’s the beater and where are the treadles? The loom to start with was just a frame.

What were my objectives in this project? In all my previous times of using a loom with vertical storage, it had always been positioned at the back of the loom. In Cambodia, I had seen storage, though horizontal behind the beater and in front of the shafts. This link should take you to the appropriate blog. Scroll down to see images of a loom with horizontal storage. There’s also a video of the loom being used.  https://wordpress.com/post/kayfaulkner.wordpress.com/4200

By positioning it here, I would be able to manipulate the sticks or whatever I wanted to store the pattern with more easily. But what would be the repercussions of having it here. I knew from past experience that when the treadles are not heavy or when long eyed heddles are used, movement of the stored pattern was possible to achieve while plain weave was woven. The pattern could be kept engaged and ready to be used. Logically I knew that this would not be possible with the pattern in front of the heddles but could some compromises be achieved?

I was also wanting to see if I could weave Bronson Lace- well it was the week of Linen and Lace! To achieve this I needed the warp threads to be used singly through the storage system. Traditionally in S E Asia there are doubled threads used here. The warp is usually very fine. I’m about to change a lot of things.

I started with just the dummy warp in a vertical storage.

So I began by winding the warp and threading it through a reed. I needed one end per reed dent.  This would allow me to keep each thread in sequence and I could identify a single thread when it came to picking up the design for storage.  I could accommodate a cotton/ linen yarn (approx. 16/2) singly in an 8 dent per cm (20 epi) reed. It was my finest “western” reed.

Then I knotted one cotton/linen warp (natural colour) to 2 ends of dummy warp (blue) to align with those in each long heddle. This will allow each thread to be raised independently. Everything has to be kept in sequence. So far all this could be accomplished off the loom. In this image note that the cotton/linen has been threaded in the reed before being tied onto the dummy warp in the heddles that make up the vertical storage unit (white).

DSC06315

To thread the heddles on the shafts, I put the warp temporarily back to front on the loom. I could not access the back of the loom easily so it had to be back to front- temporarily. The reed and vertical storage were temporarily suspended in the loom frame purely to facilitate threading the heddles on 2 shafts. Here the two shafts are on the far left hand side ready to be threaded. The wooden clamp behind the beater holds the threads securely.

DSC06317

When this is done, I have the warp threaded though heddles on 2 shafts, then  the vertical storage and then the reed with the bulk of the warp behind this.

Now to put the warp on. The total bundle is turned around. The reed is put in a beater. The vertical storage system suspended in its correct position and the shafts suspended. Treadles are attached to the shafts. Normality returns for my weavers with shafts behind the beater though with the storage between. The warp is pulled through and wound onto the back beam. I am ready to weave.

I want to weave Bronson Lace. If you understand the mechanics of the structure and have this loom set up so that I can choose an individual thread, I can manipulate the threads to achieve my goal.

This is a basic draft for a conventional loom. Using this draft it would be possible to pick up a design by selecting from shaft 3 and adding it to shaft one.

bronson lace

Theoretically I can make my 2 shaft loom weave Bronson by storing the equivalent of shaft 3 on the vertical storage loom. In a 6 thread sequence the second and fourth thread will be stored. I will store this selection in the top of the storage unit.

DSC06354

I will be able to use this stored selection to choose pairs of threads for each Bronson Lace unit. This stored selection will go in the bottom part of the storage unit. Here are two rows stored on bamboo lengths. They are stabilised by inserting the ends into some texsolv cord.

DSC06347

Once I’m ready to weave for a repeated design I’ll be able to move my pattern from the bottom to the top and back again depending on the number of repeats.

This is my graphed design.

draft

This sequence shows the selection process. The required threads are moved down from the stored selection. All pairs of threads are raised.

DSC06351

The design is selected according to the graph.

DSC06352

This pattern is transferred from the front of the loom to behind the beater and onto a sword. I have covered how to store a selected pattern for a vertical storage unit in previous blogs but as it has been a while, here is a reminder.

All the heddles from the vertical storage are brought forward.

DSC06354

The sword turned on its side. This achieves different tension for those threads that are either side of the sword.

DSC06355

By manipulating this tension, the threads that have been picked up at the front of the loom can be stored vertically. A bamboo stick  or dowel is inserted into the gap where the second sword now is.

DSC06356

As each pattern is stored, the unit of Bronson Lace is also woven before the next pattern row is picked up. Here the repeat is nearly picked up and woven.

DSC06365

In essence the weaving process for each graphed pattern row requires 6 rows of weaving.  Weave a row of plain weave, then the other plain weave row + pattern, repeat twice. Then weave alternate plain weave rows. The first row of plain weave should include the pattern warps. This is a very similar process to conventional pick up on Bronson Lace but with the facility of storing your design.

For this table runner I elected to do just one repeat. It suited the dimensions that I required. However having the facility to store this long repeat is certainly beneficial.

DSC06393

As an aside, this pattern would require 36 shafts to weave- another benefit of this style of loom. There will be more on weaving on this loom next month. The same pattern will be interpreted into other structures and more.  Here’s a sneak preview.

DSC06391

The next studio class will be in March (18th-22nd) on woven shibori to coincide with the exhibition.


At the end of April 2018: profile drafting and weave structures among other things.

May 6, 2018

I have been on an adventure to western Queensland. No, this blog will not be about that but in passing I will mention that I’m sure that the colours, textures and history in particular will find expression sometime in my work. The Longreach and Winton areas are extremely interesting destinations.

Rochelle spent a couple of days in the studio and finally finished her gigantic double width blanket. She has promised to bring it back totally finished. I bet it will keep her warm as toast. A reminder for others out there: the studio is available on a negotiated basis for students to come and weave.

This month’s studio class was Beyond Basics where we started with profile drafting and extended into structure. Jen and Hilary, both from Western Australia, produced a quantity of weaving files and actual weaving. This is an overview of the 5 day class. All the warps had the same profile drafts for the treading, while the treadling was based on each students profile draft. In this way all the samples related.

There were several hours spent on creating weaving drafts.


Jen weaving Atwater Bronson lace on a wool warp with a silk weft.

Hilary is weaving twill blocks on a draw loom. The pattern shafts are arranged as for the profile draft. What a great way this is to promote understanding of how profile drafting can be used. It’s also a fun experience.

Fabrics include 4 and 8 shaft overshot, crackle, atwater and bronson lace, summer and winter, twill blocks. The following images were taken late on the last day when the lighting wasn’t all that good.

Jen’s collection:

Hilary’s collection:

Congratulations to both. They have some very beautiful results and all projects are totally finished. It was a great 5 days. What a lot of work they did!

There was enough warp left over on two of the “overshot” looms for me to play. There had been much discussion on the length of supplementary weft floats when weaving overshot. So the challenge was for me initiated by the students was to find ways to make use of these long floats to make interesting fabrics. I’ll share these 3 experiments. It was a great way to clear the looms and to enable students to really appreciate the potential of a structure.

Of course there’s always woven shibori. Any structure that achieves long supplementary floats is ideal for converting into weft shibori. Eventually I will get around to dye this hand towel.

This hand towel uses just one block of supplementary weft which are then stitched into groups once removed from the loom. It’s a pretty effect.

When weaving multishaft overshot (a 4 shaft profile draft converts to 8 shafts of structure) each block can be woven independently. This meant that I elected to use just the half tones with just weft floats on the front to weave this fabric. The pleating will stretch because of the wool/lycra yarn that was used. The finished result and the reverse side and before laundering.

 

 

I thought the weavers may enjoy my installation. I had acquired these very rusty reeds over a number of years. Here, at the entrance to the studio, was the opportunity to do something with them.

 

Next month: There will be no studio classes. I’m getting ready to set off on another textile adventure.


February 2018: Linen and Lace, Woven Shibori and other stuff.

March 5, 2018

In the studio this month I held the second Linen and Lace class. The class was nearly full with 4 students. That is why this follows on from #1 in January. There were great results again. Here are some images of work by Karen, Jen and Jan. It is worthwhile to note that two of these are fairly new weavers.

They wove. Karen is missing from this photo.


And they finished off. Here a Swedish Lace series is being mangled using a marble rolling pin.

And went home with a great collection.

Jen’s collection

 

Karen’s collection

 

Jan’s collection.

Rochelle after attending #1 decided that she’d like to weave a double width alpaca blanket, so she had the opportunity to also refresh on the theory… and to check out what the others did.

 

One of the additional challenges of this week was to experiment with pick up on lace weaves if time permitted. In this way all could come to an understanding that more complex design could be achieved with minimal shafts. There are some projects in both Jen and Jan’s collection. Having the loom threaded that way also allowed me to play with a couple of combinations both while the class was underway and afterwards.

On the Bronson Lace warp students could accomplish pick up of a design for an overall pattern or combine it with inlay. I got to weave these two examples.

 

For those interested in drafts, here it is.

The other pick up warp was on Spot Bronson. Jen got to weave a complex spot Bronson design while I got to play with combinations afterwards. This is my playtime, all off the one warp.

I threaded that one so that both lace and Summer and Winter could be woven at the same time. Jen got to weave a complex spot Bronson design while I got to play with combinations afterwards. I also wanted to revisit the experimentation I’d done with doupe leno from the previous workshop. So it was a 3 way challenge and a bit of forward planning was required.

Here’s the basic draft.

Spot Bronson and Summer and Winter combined. Note as well as being woven full width, there’s an isolated motif in the middle of the lace weave.

To weave the leno, I required a group of 4 threads per dent if I was going to explore more doupe leno stored on an additional stick. My aim was to compare the method that I’d used in the previous month on a countermarche loom with this on the jack loom. However the loom had been threaded 2 per dent. As I knew that I’d be taking advantage of this warp I used a reed where I could remove the uprights allowing me to maintain the sett while achieving 4 per dent. Part way through increasing dent size.

An overhead view of this reed. Once I’m finished, I slide the brass strip back into place securing the reed.

This image shows the leno being picked up. Note the wider spacing has also grouped four threads across in the plain weave.

Preparing one group of 4 to be placed on a doupe. More about this process can be seen on January’s post. I found this process much easier to weave on the Jack loom. The important thing to remember is to put light tension on the pick up leno shaft as each row is woven. It prevents doupes being caught as the shafts change.

 

The finished leno.

On modifying my reed spacing: One might ask why I just didn’t use a reed with wider spaces to start with. So for the last experiment, I also wove a piece with leno (pick up alternating) and Spot Bronson as an all over pattern. While weaving the threads were very much isolated in groups of 4. After finishing, the warp threads are more evenly spaced. However while weaving, because of the denting, it was impossible to beat the fabric to square as a result the lace floats are elongated.

Here’s the finished collection from that experimental warp.

 

At the end of this month I was invited to teach at a weaving retreat for 5 weavers at Sewjourn, just north of Melbourne. They had chosen woven shibori as the focus for their study with a bit of additional dyeing tossed in.

Sewjourn is a perfect location for a small group. It has well set up and basic accommodation where you self- cater and a great studio space, set in a rural location. Those weavers sure can cook!

It was an amazing 5 days. Congratulations to Trudi, Di, Jillian, Elizabeth and Kaye. Here are some images.

The studio. Weavers hard at play (aka work).

Some fibre reactive dyeing both as painted warps and pulled up woven shibori.

Different shades of blue from the indigo bath.

Completed dyeing of warps (painted and ikat) and small skeins for weft ikat.

A weft ikat being woven. While the focus was on woven shibori, it was too good an opportunity to see how this would weave up.

The result of a fabulous five days of play.

Next month: In the studio there will be a 5 day class focusing on all manner of twills. There are still 2 places available.

 


January 2018 Lace weaves and Leno

February 2, 2018

In January, I hosted Linen and Lace in my studio. This class will be run again in a few weeks’ time. My intention is to run small classes with highly personalised teaching, hence the need to divide it into two. It also gives me an opportunity to play as you’ll see later.

Rochelle and Heather explored all manner of lace weaves (Spot Bronson, Bronson, Swedish, Huck, 3 or 5 ends and one piece that combined several). They demystified structures, investigated finishing techniques and took home a collection of beautifully woven and finished pieces. Here’s some images from the 5 days. Congratulations to both of them. It was a great week!

 

 

They also explored leno with one piece. The left over warp gave me the perfect opportunity to play.  They got to see the benefit of my play so it’s a “win, win” situation. Towards the end of last year I had explored a technique from John Becker’s Pattern and Loom: Chapter 1, Chinese Han monochrome pattern weaves. The next chapter is on gauze weaves and I spied leno from the Han Dynasty. What caught my attention was a drawing showing loops (or doupes) put on a rod that mechanically achieved those twists that characterised leno. I have used a treadle doupe system to achieve leno and while it works a treat, it takes ages to set up. I wondered how efficiently this would work. It also ties in very nicely with my fascination with S. E. Asian textiles as I’d been seeing leno in use there. Here’s an example from my collection from Bhutan with a detailed view.

 

Leno is a different way of creating a lacy effect to “lace weaves” which are loom structured. They are classed as being in the “gauze” family. However they do still fit nicely into the week’s theme.

So I set it up. Here’s some things I had to consider. I was working with linen at a sett of 8 epcm (20epi). The warp was already on the loom however I would need to rethread the reed to do what I wanted to do.  Each twist has to have all multiples in one dent of a reed, and I did want to use a reed. So I went to my collection of reeds and found one that had a spacing of 3 dpcm. That meant that I’d thread the reed with 4 per dent for two dents and then leave one free. A dent by the way for those non weavers is a space in the reed.  I quite liked the look of the spaced warp.

Then I had to construct the loops or doupes for the leno. These loops are between the reed and the shafts. It’s easy enough to create the twist in front of the beater and transfer to behind the reed. I could have constructed these loops in much the same way that I do for heddles on SE Asian looms. However I took the soft option of using old texsolv heddles folded in half. They were a bit bulky but it would save time and let me see how this would work.

These two images show how the loops are formed to create the leno twist.

 

The rod with all those loops on behind the beater.

To weave, it was a relatively simple matter to raise the extra shaft to create those leno twists across the full width of the piece. I did find that it was most effective as the shed wasn’t huge to insert a stick to clear the shed.

The loom I’m using is a countermarche. On this loom there is a lot of movement with the warp threads going up and down. I did find that to weave plain weave a bit of tension on the loop stick allowed for a freer passage of the warp threads. Once you go into the rhythm of just putting a bit of tension while the threads were passing through the “neutral” position at the middle of the treadling movement, weaving progressed easily.

By the way the weft thread is heavier than the warp. I wanted weaving to progress quickly for this experiment. My choice was that heavier white linen thread in my stash: the only one and one that I’d like used up. I’m not sure that it was the best colour choice but it suited my purpose.

Weaving progresses on the loom.

 

After finishing. The first image has light behind to see the leno more clearly.

 

And while I was about it here’s a piece of leno that is manually manipulated using the threading on the same loom. The threads in one dent are twisted with those in the next dent and then offset. One image is just woven while the other is after washing. Note how much the denting space has closed up.

The next class on Linen and Lace is from 19-23rd . There’s still 1 place left. Perhaps my students and I will have time to do some more play with leno.